Garage doors are an important part of our homes and play a significant role in ensuring the security and protection of our vehicles, tools, and other belongings.
However, a broken spring can make it difficult to open and close the door, leaving you and your family feeling helpless and vulnerable.
Fortunately, you can still open your garage door with a broken spring, and in this post, we will show you how to do it safely and effectively.
Table of Contents
Step 1: Identifying the Type of Spring
Before attempting to open your garage door, you need to determine the type of spring system you have.
There are two main types of garage door springs: torsion springs and extension springs.
Torsion springs are located above the door, while extension springs are located along the sides.
Knowing which type of spring you have is important because it will determine the tools and techniques you will need to open the door.
Step 2: Gathering the Tools You Need
Next, gather the tools you will need to open your garage door.
Depending on the type of spring system you have, you may need a ladder, a socket wrench, pliers, and a strong cord or cable.
If you have torsion springs, you will also need a winding bar.
Step 3: Opening the Door Manually
Once you have gathered all the necessary tools, it’s time to open your garage door manually.
To do this, you will need to locate the emergency release cord, which is usually located near the bottom of the door.
Pull the cord to release the door from the opener and allow you to open it manually.
Step 4: Securing the Door
To prevent the door from closing while you work on it, use a strong cord or cable to secure it in an open position.
Loop the cord around one of the door tracks and secure it to a solid object, such as a wall or post, to keep the door from closing.
Step 5: Repairing the Spring
Now that you have the door open and secure, it’s time to repair the broken spring.
If you have torsion springs, you will need to use a socket wrench to loosen the set screws that hold the spring in place.
Once the set screws are loosened, use a winding bar to gently wind the spring to relieve the tension.
If you have extension springs, use pliers to gently remove the broken spring and replace it with a new one.
Step 6: Reattaching the Door to the Opener
Once you have repaired the spring, reattach the door to the opener and test it to make sure it opens and closes properly.
If the door still doesn’t work, double-check to make sure that the springs are properly tensioned and that the door is properly aligned.
Conclusion
In conclusion, a broken spring can be a frustrating and stressful experience, but it’s not the end of the world.
With the right tools and a little patience, you can open your garage door with a broken spring and get back to your daily routine.
Remember to always work carefully and use caution when repairing springs, as they can be under a lot of tension and can cause injury if not handled properly.
