How do I find Moen faucet model number

The model/series number is often a four or five-digit number that starts with “7” or “8” and is followed by letters.

On occasion, the series number can be seen on the underside of the spout.

The series number is frequently seen on the rear of the ornate ring at the spout’s bottom.

How do I find Moen faucet model number

How do I find Moen faucet model number – Similar Questions

Are Moen shower valves universal?

For a long time, Moen tub/shower valves were made using one of three valves. Standard, Posi-Temp, and Moentrol are the three types of valves available.

Although they have a similar appearance, the trim is not always interchangeable. If your Moen valve works this way, any Posi-Temp trim will work.

How do I order replacement parts from Moen?

Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022, can be contacted for replacement parts by calling 1-800-289-6636 (Canada 1-800-465-6130) or writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022.

All warranty claims must be accompanied by proof of purchase (original sales receipt) from the original consumer purchaser.

How do I find the make and model of my kitchen faucet?

  • The model number is printed on a tag affixed to the faucet’s cold water supply line.
  • The supply line is hidden below the bidet bowl or beneath the sink, countertop, or bath rim.
  • The model number, also known as a part number, is usually preceded by the letters “P/N.”

How do I know what kind of faucet I have?

  • Look for the logo. If you can find the logo someplace on your kitchen faucet, it will be the first and quickest approach to figure out what brand it is.
  • Look for a model number.
  • Measure the stem and count the splines on the broach.
  • Distinguishing features.
  • Use a broach gauge.

Are all Moen kitchen faucet cartridges the same?

Fits all Moen two-handle kitchen and bathroom faucets, as well as two- and three-handle tub/shower faucets, that were made before our Duralast® two-handle cartridges were introduced. There is no compatibility between the 1224 and Duralast cartridges.

Where do I find my shower faucet model number?

The model number is printed on a tag affixed to the faucet’s cold water supply pipe. The supply line is hidden below the bidet bowl or beneath the sink, countertop, or bath rim.

The model number, also known as a part number, is usually preceded by the letters “P/N.”

How do I choose a kitchen faucet size?

– Step 1: You have to find out the Project Scope.
– Step 2: Take Stock of the Sink and Mounting Holes.
– Step 3: Measure the Faucet Centers.
– Step 4: You have to check the Surrounding Space.

Are shower faucets universal?

They’re all compatible, and any Delta Shower Trim Kit will work with any of these valves.

Are Moen replacement cartridges free?

If this faucet develops a leak or drips during the Warranty Period, Moen will provide the parts necessary to restore the faucet to good working order at no cost to you, and will replace “free of charge” any part or finish that proves to be defective in material and manufacturing workmanship, under normal conditions.

Does Home Depot carry Moen parts?

Yes, they have it.

How do I know what bathroom faucet I have?

The 22-point broach on an American Standard faucet may be identified.

Measure the broach just to be sure. It’s probably an ancient American Standard model if it measures 0.375 inches (0.95 cm), and it’s probably a contemporary American Standard model if it measures 0.438 inches (1.11 cm).

Are shower valves universal?

To begin with, you must never combine manufacturers on trim and rough-in valves. Even within a single manufacturer, there are several valves and trims that are not interchangeable. Trim and rough aren’t often available separately in shower setups.